Since unloading the truck was going to be a lot of work and we only had a short time we decided to fly this time instead of wasting 32 hours driving to TN and back. I hate flying! But there was no way around it driving would be too much. So my Mom booked flights out of LaGuardia Airport. Usually we use JFK airport but there were no direct flights. JFK is convenient because of the air train which connects the Long Island Rail Road to the airport. For LaGuardia we had a slightly different route The Long Island Rail Road to Woodside station and from there the Q70 Limited to the airport. I got to Woodside before my Mom which gave me enough time to find where the bus stop was located. It was easy, not as secure as the air train but it was good.
The flight was less than two hours so by the time they were bringing the snack cart by we were almost in TN. I had just enough time to finish my coffee and biscoff cookie (which was delicious) before it was time to prepare for landing.
When I packed the truck I had written numbers on the paper and bubble wrap on the furniture for each bed room. So when I got to TN I put matching numbers on the bedroom doors.
This way it was easier to tell the movers which room to bring the furniture.
While I was there I was able to get a full look at the damage my dear sweet dog Schultzy had done to the laundry room door. Originally there was a cat door that she would poke her nose through when she was 'in her room'. It was cute. But at some point she realized she could make the opening bigger. And she did.
Saturday was our day for fun. My Mom took the packing materials to the local dump while I started building four more book cases that I had sent in the truck. When Meg got back we picked a playlist from records she had recently purchased. The music choice was certainly eclectic.
And judging from the stack of boxes that we emptied we were very successful. My library is really coming along nicely (though the books aren't organized but that will be fixed when I move).
Then we moved on to Meg's new hobby of throwing knives and axes. She had recently gone to a SCA event and won a banner for her skill as a novice. So she wanted to build a target to practice with and learn. The target sadly didn't last long but I think the design was good just the wrong materials.
We used PVC to make the frame because we wanted to do this easily and cheap. We also wanted it to be light enough that Meg could move it.Two blocks that I think are actually for a retaining wall but the had a cross in the top that fit perfectly over the 1.5 inch pipe and provided the weight we needed to hold it down. I think the wood we got was to hard. Eventually we got some knives to sink in and stay but a softer wood or tree trunk slice would have been better. The chain needed to be tighter and stronger. The target was to loose which allowed it to swing back with the knife (that also effected the knives force). One of the knives broke the chain when it was thrown and we decided that the axes would probably break the target entirely. We used my Uncle's fence for the ax throwing which had the strength to hold up to the axe weight.
On Sunday we went back to the airport and flew, sadly, back to NY. It was a quick trip but we got a lot done and getting the furniture out of our house in NY was a big step forward to get the house sold.
No comments:
Post a Comment